합금 절삭 장비 및 유압식 굴착기(Alloy Steel Chisel/Tool and Hydraulic Rock Breaker)

사건 정보

설명

1. The product under consideration for the present investigation is "alloy steel chisel/ tool and hydraulic rock breaker in fully assembled condition" (hereinafter referred to as the "subject goods" or the "product under consideration"). In common usage, the product under consideration is known as hydraulic breaker, hydraulic rock breaker, chisel/tool. The PUC is usually imported under the following description but not limited to the following: "Alloy Steel Chisel: imported as Rock Chisel Teeth, Tooth Rock Chisel, Breaker Tool, Hydraulic Hammer (Tools), Hydraulic Rock Breaker Wedge Point for Working Tool, Chisel Blunt, Blunt, Chisel etc. Hydraulic Rock Breaker: Hydraulic Rock Breaker (with and without Chisel), Rock Breaker with & without Bulk, Hydraulic Rock breaker Assembly Kit, Rock breaker spare body assembly, Hydraulic Rock Breaker Fine, Hydraulic Rock Breaker, Rock Breaker, Box Type Hydraulic Rock Breaker etc." 2. Uses: Rock Breakers with chisel are commonly used for quarry and demolition purposes. It is used for the purpose of trenching, breaking asphalt, concrete, hard rocks and huge stones. A chisel (also known as tool) is attached to the body of a hydraulic rock breaker, and it is the chisel which comes in contact with the surface to be broken on impact. Chisels are also sold separately apart from a rock breaker. Usually, a chisel gets worn out after certain hours of usage and is replaced with another chisel. Depending upon the type of usage and the kind ofimpact force required, the tip ofthe chisel may be of different shapes such as blunt, wedge, moil etc. 3. Tariff classification: The PUC are usually imported under tariffheading 84314930 and 84314990 with the description, "Of other excavating, levelling, tamping or excavating machinery for earth, mineral or ores". The concerned PUC can be imported under other headings as well. Therefore, the customs classification mentioned above are only indicative, and in no way binding on the scope ofthe investigation. 4. The parties to the investigation may provide their comments on the PUC and propose PCNs, if any, within 15 days of circulation of non-confidential version of the anti-dumping application.

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 4건

1. 2024-06-27
   원심 · 최종판정

   재무부 최종판정 : 반덤핑관세 부과

2. 2024-03-28
   원심 · 최종판정

   업체명 Soosan Heavy Industries Co., Ltd. 마진 - 비고 Hydraulic Rock Breakers 업체명 Soosan Heavy Industries Co., Ltd. 마진 - 비고 Alloy Steel Chisels 업체명 DAEMO Engineering Co. Ltd. 마진 9.43% 비고 Hydraulic Rock Breakers 업체명 DAEMO Engineering Co. Ltd. 마진 12.47% 비고 Alloy Steel Chisels 업체명 D and A Heavy Industries Co., Ltd. 마진 - 비고 Hydraulic Rock Breakers 업체명 D and A Heavy Industries Co., Ltd. 마진 12.47% 비고 Alloy Steel Chisels 업체명 Hyundai Everdigm Corporation 마진 11.91% 비고 Hydraulic Rock Breakers 업체명 Hyundai Everdigm Corporation 마진 12.47% 비고 Alloy Steel Chisels 업체명 FEEL INDUSTRIAL ENGINEERING CO. LTD. 마진 8.16% 비고 Hydraulic Rock Breakers 업체명 FEEL INDUSTRIAL ENGINEERING CO. LTD. 마진 12.47% 비고 Alloy Steel Chisels 업체명 HANSUNG SPECIAL MACHINERY 마진 52.77% 비고 Hydraulic Rock Breakers 업체명 HANSUNG SPECIAL MACHINERY 마진 - 비고 Alloy Steel Chisels 업체명 기타 마진 52.77% 비고 Hydraulic Rock Breakers 업체명 기타 마진 12.47% 비고 Alloy Steel Chisels 상공부 DGTR 최종판정

3. 2022-09-30
   조사개시

   상공부 DGTR 반덤핑 조사개시 - 조사대상기간 : 2021.4.1. ~ 2022.3.31.

4. 날짜 미상
   제소

   DOZCO (India) Pvt. Ltd. 피제소국 : 한국, 중국