철강재 파이프 (Hollow Structural Sections)

사건 정보

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 21건

1. 2024-02-09
   재심 · 개시

   면제심사 조사개시: -대상: The goods the subject of the exemption inquiry (the ‘exemption goods’) are described as: 350 grade, 60 mm x 120 mm x 10 mm thick steel bars with a length of 11.9 metres

2. 2024-01-25
   재심 · 개시

   면제심사 조사개시: -대상: Steel electric resistance welded pipe, circular, seamless, EN10305 Standard, cold drawn, with OR without grooves, in the following sizes: · 51.0 mm Outside Diameter x 47.0 mm Inside Diameter, Wall Thickness 2.0mm · 63.5 mm Outside Diameter x 59.5 mm Inside Diameter, Wall Thickness 2.0mm · 76.2 mm Outside Diameter x 72.2 mm Inside Diameter, Wall Thickness 2.0mm Having all of the following specifications: · Length ranging from 4.0 metres to 5.8 metres or from 5.8 metres to 8.9 metres; · Surface roughness (Ra) no greater than 1.6 micrometres; · Outside and inside diameter tolerance no greater than +/- 0.1mm; · Straightness tolerance 0.1mm; and · E355-SR grade steel (JIS G3445 STKM 11A-E-C), cold drawn and stress relieved in a controlled atmosphere.

3. 2023-08-02
   재심 · 최종판정

   ㅇ 면제조사 최종판정 - 2022.7.19. 개시 건 관련 - 면제 부정 판정

4. 2022-11-16
   재심 · 최종판정

   ㅇ 면제조사 최종판정 : 조치 면제 - 면제적용기간 : 2021.9.29. ~

5. 2022-07-19
   재심 · 개시

   ㅇ 면제심사 조사개시 - 대상 : Electric resistance welded pipe made of carbon steel, comprising circular and hollow sections normally referred to as CHS (circular hollow sections), RHS (square or rectangular) and trapezoidal hollow sections comprising ALL of the following: a) an air-blown hot-dipped galvanised finish; b) a zinc coating mass of 200-300g/m2

6. 2022-06-30
   일몰재심 · 최종판정

   ㅇ일몰재심 최종판정 : 반덤핑관세 유지 - (한국)13.8% AD (중국)1.0%~30.4% (말레이시아)20.8% (대만)0.0%~23.5%

7. 2021-11-18
   재심 · 개시

   ㅇ 면제조사 개시 (면재요청 품목 ) The applicant described the goods the subject of the exemption inquiry (theexemption goods) as curtain rods with: - 25mm outside diameter in 0.5mm gauge/wall thickness in both powdercoated (White/Ivory/Black) and electroplated (Brushed Chrome). - 32mm outside diameter in 0.7mm gauge/wall thickness in electroplated finish (Brushed Chrome). The curtain rods come in lengths 2.0m and 3.0m, and are individually heat/shrink wrapped and labelled. The curtain rods are made of A class hot-rolled strip metal comprising of 0.12% carbon and are made using a roll forming process and a longitudinal welding technique. The exemption goods are classified to the tariff subheading 7306.30.00 (statistical code 30) of Schedule 3 to the Customs Tariff Act 1995 (Cth)

8. 2021-09-22
   일몰재심 · 개시

   반덤핑 부과 연장 조사 개시 - 최종 판정은 2022년 2월 22일 이내 예정

9. 2020-07-27
   재심 · 개시

   면제심사 조사개시 : 의견제출 2020. 8. 18. 까지 Electrical Resistance Welded Hot-dip Galvanised Shouldered Pipe produced in accordance with American Petroleum Institute Standard Specification 5L. The steel grade for the pipe and the shoulder rings that are welded to both ends of the pipe is API 5L Grade B PSL1. A full penetration fillet weld secures the rings to the ends of the pipe. Following welding, the full length of shouldered pipe is hot-dip galvanised to a minimum zinc coating thickness of 300 g/m2. The exemption goods are also specified according to the following dimensions: o Outer diameter (mm): 165.1 o ends tolerance (mm): -0.4, +1.6 o Wall thickness (mm): 2.5 ± 0.32 - Ring and shoulder: o Nominal ring thickness (mm): 4.8 ± 0.15 o Shoulder outside diameter (mm): 174.5 ± 0.8 o Ring length (mm): 17.5 ± 0.4 o Maximum out of square (mm): 1.0 - Length not less than 6,000 mm and not greater than 6,500 mm with a tolerance of 50 mm, +20 mm. The application states that the exemption goods are generally classified to tariff subheading 7306.30.00 of Schedule 3 to the Customs Tariff Act 1995

10. 2018-06-06
    재심 · 최종판정

    * 재심 조사개시 : 2017. 7. 14

11. 2017-06-21
    일몰재심 · 최종판정

    업체명 국제강제 마진 -1.9 비고 업체명 기타(All Others) 마진 -1.9 비고 * 일몰재심 조사개시 : 2016. 10. 31

12. 2016-03-18
    재심 · 최종판정

    반덤핑 우회덤핑 조사개시: 2015. 5. 11 / 최종판정 2016. 3. 18

13. 2016-02-19
    재심 · 개시

    면제조사 개시 - 면제심사 결과 : 2016. 11. 21

14. 2016-02-19
    재심 · 개시

    면제조사 개시 - 면제조사 결과 발표 : 2016. 11. 21

15. 2015-05-15
    재심 · 최종판정

    업체명 국제강재 마진 -6.7 비고 적용관세 0% 면제조사 판정 - 적용관세 0%

16. 2014-03-03
    재심 · 개시

    면제심사 조사개시 - 대상 : HS Code 7306.61.00 * 면제심사 결과 : 2014. 6. 30

17. 2014-02-19
    재심 · 개시

    면제심사 조사개시 - 대상 : HS Code 7306.30.00 * 면제심사 결과 : 2015. 3. 20

18. 2012-07-03
    원심 · 최종판정

    업체명 국제강제 마진 3.2 비고 업체명 기타(All Others) 마진 8.9 비고

19. 2011-12-23
    원심 · 예비판정

    업체명 국제강제 마진 11.5 비고 업체명 기타(All Others) 마진 11.5 비고 반덤핑 예비판정 * 잠정관세 부과 : 2012. 1. 10

20. 2011-09-19
    조사개시

    반덤핑 조사개시 : 2011. 9. 19

21. 날짜 미상
    제소

    OneSteel Australian Tube Mills Pty Ltd 피제소국 : 한국, 대만,태국, 말레이시아, 중국