철강재 파이프 (Hollow Structural Section)

사건 정보

설명

Certain electric resistance welded pipe and tube made of carbon steel, comprising circular and non-circular hollow sections in galvanised and non-galvanised finishes. The goods are normally referred to as either CHS (circular hollow sections) or RHS (rectangular or square hollow sections). The goods are collectively referred to as HSS (hollow structural sections). Finish types for the goods include inline galvanised (ILG), pre-galvanised, hot-dipped galvanised (HDG) and non-galvanised HSS. Sizes of the goods are, for circular products, those exceeding 21 millimetres (mm) up to and including 165.1 mm in outside diameter and, for oval, square and rectangular products those with a perimeter up to and including 1277.3 mm. Categories of HSS excluded from the goods are conveyor tube; precision RHS with a nominal thickness of less than 1.6 mm and air heater tubes to Australian Standard (AS) 2556. The following categories of HSS are excluded from the goods: - conveyor tube made for high speed idler rolls on conveyor systems with inner and outer fin protrusions removed by scarfing (not exceeding 0.1 mm on outer surface and 0.25 mm on inner surface) and out of round standards (i.e. ovality) which do not exceed 0.6 mm in order to maintain vibration free rotation and minimum wind noise during operation; - precision RHS with a nominal thickness of less than 1.6 mm; and - air heater tubes to AS 2556. The applicant at the time of the original investigation supplied additional information to clarify the scope of the goods description, indicating that all HSS regardless of finish is included. Finish types for the goods include in-line galvanised, pre-galvanised, hot-dipped galvanised and non-galvanised HSS. Non-galvanised HSS is typically of painted, black, lacquered or oiled finish coatings. CHS with other than plain ends (such as threaded, swaged and shouldered) are also included. HSS is generally produced to either the British Standard BS 1387 or the Australian Standard AS 1163 or international equivalent standards (including ASTM/JIS and KS). HSS can also be categorised according to minimum yield strength, the most common classifications being 250 and 350 mega Pascals (MPa). HSS may also be referred to as extra-light, light, medium, heavy or extra heavy according to its wall thickness. The goods include all electric resistance welded pipe and tube made of steel meeting the above description of the goods (and exclusions), regardless of whether or not the pipe or tube meets a specific structural standard or is used in structural applications. Exclusions from the measures As a result of Ministerial Exemption Instrument No 1 of 2016,1 certain HSS is exempt from the anti-dumping measures due to a Tariff Concession Order2 granted in respect of: Tubes, square or rectangular, electric resistance welded, complying with Australian / New Zealand Standard 1163:2009, Grade C350L0 or C450L0, with a perimeter not less than 1050 mm and having either: a) silicon content plus 2.5 times the phosphorus content NOT greater than 0.09%; b) silicon content greater than 0.14% and NOT greater than 0.24%

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 4건

1. 2016-03-17
   원심 · 최종판정

   ㅇ 산업부장관 최종 결정 - 반덤핑위원회 보고서 채택 - 중국과 말레이시아로부터의 우회덤핑 제재

2. 2016-02-29
   원심 · 최종판정

   ㅇ 반덤핑위원회 우회수출 조사보고서 제출 - 국제철강과 J Steel 은 합금수출이 아님을 증명함으로써 무혐의 판정 # 우회수출, 우회덤핑

3. 2015-05-11
   조사개시

   ㅇ 반덤핑위원회 우회조사 개시 - 사소한 변경

4. 날짜 미상
   제소

   피제소국 : 한국, 중국, 말레이시아, 대만