알루미늄아연도금강판(Aluminium zinc coated steel of a width equal to or greater than 600 millimeters)

사건 정보

설명

The goods the subject of the application (the goods) are: Flat rolled iron and steel products (whether or not containing alloys), of a width equal to or greater than 600 millimeters (“mm”), plated or coated with aluminium-zinc alloys, not painted, and whether or not including resin coating. Trade or further generic names often used to describe the subject goods include: · ZINCALUME® steel; · GALVALUME® steel; · Aluzinc, Supalume, Superlume, ZAM, GALFAN; · Zinc aluminium coated steel; · Aluminium zinc coated steel; · Aluminium zinc magnesium coated steel; · Alu-Zinc Steel sheet in Coils; · Al/Zn; and · Hot Dipped 55% Aluminium-Zinc Alloy coated steel sheet in coil. The imported goods the subject of this application covers aluminium zinc coated steel whether or not including any combination of surface treatment. For example, whether passivated (often referred to as chromated), resin coated or not resin coated (often referred to as Anti-Finger Print (“AFP”) or not AFP), oiled or not oiled, skin-passed or not skin-passed. Excluded from the goods description of this application is un-passivated (often referred to as unchromated) aluminium zinc coated steel. The amount of aluminium zinc coating on the steel is described as its coating mass and is nominated in grams per meter squared (g/m2 ), with the prefix being AZ (Aluminium Zinc). Common coating masses used are: AZ200, AZ150, AZ100, and AZ70. There are several relevant International Standards for aluminium zinc coated steel, covering the full range of products via specific grade designations, and including the recommended or guaranteed properties of each of those product grades. These relevant standards are noted in the table below. International Standards | Product Grades General and Commercial Grades AS/NZS 1397 | G1, G2 ASTM A792 | CS, type A, B and C EN 10346 | DX51D, DX52D JIS 3321 | SGLCC Forming, Pressing & Drawing Grades AS/NZS 1397 | G3 ASTM A792 | FS, DS EN 10346 | DX53D, DX53D JIS 3321 | SGLCD, SGLCDD Structural Grades AS/NZS 1397 | G250, G300, G350, G450, G550 ASTM A792 | 33 (230), 37(255), 40 (275), 50 (340), 55 (380), 80(550) EN 10346 | S220GD, S250GD, S280GD, S320GD, S350GD, S550GD JIS 3321 | SGLC400, SGLC440, SGLC490, SGLC570 Tariff Classifications of the imported goods The goods are generally, but not exclusively, classified to the following tariff classifications in Schedule 3 to the Customs Tariff Act 1995: · 7210.61.00 (statistical code 60, 61 and 62); · 7225.99.00 (statistical code 39). These tariff classifications and statistical codes may include goods that are both subject and not subject to this investigation. The listing of these tariff classifications and statistical codes are for convenience or reference only and do not form part of the goods described above. Please refer to the description of the goods for authoritative detail regarding goods the subject of this investigation.

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 6건

1. 2023-08-09
   재심 · 개시

   ㅇ 신속심사(Accelerated Review) 개시 - 신규수출자 동국CM(Dongkuk Coated Metal Co) 관련

2. 2021-12-24
   원심 · 최종판정

   업체명 KG동부제철 마진 2.6 비고 업체명 동국스틸 마진 3.9 비고 업체명 비협조 수출자 마진 10.5 비고

3. 2021-11-15
   * 대만에 대해서 반덤핑 조사종료

   관련내용

4. 2021-09-22
   원심 · 예비판정

   업체명 KG동부제철 마진 2.5 비고 업체명 동국스틸 마진 6.9 비고 업체명 비협조 수출자 마진 13.7 비고 * 반덤핑 예비판정 발표 (잠정조치) - 2021. 11. 15 이내 최종판정 예정

5. 2020-06-30
   조사개시

   반덤핑 조사개시 ㅇ POI : 2019.04.01 - 2020.03.31 * 반덤핑 조사기한 연장 : 2020. 10. 19 → 2021. 4. 21 * 반덤핑 조사기한 연장 : 2021. 10. 27

6. 날짜 미상
   제소

   BlueScope Steel Limited(BlueScope) 피제소국 : 한국, 대만, 베트남