세탁기 (Large Residential Washers)

사건 정보

설명

The articles covered by this investigation are all LRWs and certain parts thereof. For purposes of this petition, the term LRWs denotes all automatic clothes washing machines, regardless of the orientation of the rotational axis, with a cabinet width (measured from its widest point) of at least 24.5 inches (62.23 cm) and no more than 32.0 inches (81.28 cm), except as noted below. Also covered are certain parts used in large residential washers, namely: (1) all cabinets, or portions thereof, designed for use in large residential washers; (2) all assembled tubs designed for use in large residential washers which incorporate, at a minimum: (a) a tub; and (b) a seal; (3) all assembled baskets designed for use in large residential washers which incorporate, at a minimum: (a) a side wrapper; (b) a base; and (c) a drive hub; and (4) any combination of the foregoing parts or subassemblies. Excluded from the scope are stacked washer­dryers and commercial washers. The term “stacked washer­dryers” denotes distinct washing and drying machines that are built on a unitary frame and share a common console that controls both the washer and the dryer. The term “commercial washer” denotes an automatic clothes washing machine designed for the “pay per use” segment meeting either of the following two definitions: (1) (a) it contains payment system electronics; (b) it is configured with an externally mounted steel frame at least six inches high that is designed to house a coin/token operated payment system (whether or not the actual coin/token operated payment system is installed at the time of importation); (c) it contains a push button user interface with a maximum of six manually selectable wash cycle settings, with no ability of the end user to otherwise modify water temperature, water level, or spin speed for a selected wash cycle setting; and (d) the console containing the user interface is made of steel and is assembled with security fasteners; or (2) (a) it contains payment system electronics; (b) the payment system electronics are enabled (whether or not the payment acceptance device has been installed at the time of importation) such that, in normal operation, the unit cannot begin a wash cycle without first receiving a signal from a bona fide payment acceptance device such as an electronic credit card reader; (c) it contains a push button user interface with a maximum of six manually selectable wash cycle settings, with no ability of the end user to otherwise modify water temperature, water level, or spin speed for a selected wash cycle setting; and (d) the console containing the user interface is made of steel and is assembled with security fasteners. Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a vertical rotational axis; (2) are top loading; (3) have a drive train consisting, inter alia, of (a) a permanent split capacitor (PSC) motor, (b) a belt drive, and (c) a flat wrap spring clutch. Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a horizontal rotational axis; (2) are front loading; and (3) have a drive train consisting, inter alia, of (a) a controlled induction motor (CIM), and (b) a belt drive. Also excluded from the scope are automatic clothes washing machines that meet all of the following conditions: (1) have a horizontal rotational axis; (2) are front loading; and (3) have cabinet width (measured from its widest point) of more than 28.5 inches (72.39 cm). For Customs purposes, the LRWs covered by the investigation are provided for under Harmonized Tariff Schedule of the United States (“HTSUS”) subheading 8450.20.00. LRWs and certain parts thereof subject to this petition may also be imported under HTSUS subheadings 8450.11.00, 8450.90.20, and 8450.90.60. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this petition is dispositive.

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 8건

1. 2023-02-07
   원심 · 종료

   세이프가드 부과 종료

2. 2020-11-24
   일몰재심 · 최종판정

   ITC 세이프가드 조치 연장 결정 - 정확한 연장기간은 12.29 Public report에 공개될 예정 * Report URL : https://www.usitc.gov/commission_publications_library

3. 2018-02-07
   원심 · 최종판정

   최종조치 발표 * 캐나다 산만 최종 제외 결정

4. 2018-01-22
   원심 · 최종판정

   세이프가드 조치 최종결정 - 쿼터 [특이사항] 참고

5. 2017-12-04
   원심 · 예비판정

   조사결과 권고안 제출

6. 2017-10-05
   원심 · 예비판정

   산업피해 판정 발표 (긍정) - 공청회 개최 : 2017. 10. 19

7. 2017-06-05
   조사개시

   세이프가드 조사개시 : 2017. 6. 5

8. 2017-05-31
   제소

   Whirlpool Corporation 피제소국 : 한국, 모든국가