무계목강관(Seamless Carbon and Alloy Steel Standard, Line, and Pressure Pipe)

사건 정보

설명

The merchandise covered by the scope of these investigations is seamless carbon and alloy steel (other than stainless steel) pipes and redraw hollows, less than or equal to 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process (e.g., hot-finished or cold-drawn), end finish (e.g., plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish (e.g., bare, lacquered or coated). Redraw hollows are any unfinished carbon or alloy steel (other than stainless steel) pipe or “hollow profiles” suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials (“ASTM”) or American Petroleum Institute (“API”) specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel (other than stainless steel) standard, line, and pressure pipes produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, ASTM A- 1024, and the API 5L specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusions discussed below. Specifically excluded from the scope of the investigations are: (1) all pipes meeting aerospace, hydraulic, and bearing tubing specifications; (2) all pipes meeting the chemical requirements of ASTM A-335, whether finished or unfinished; and (3) unattached couplings. Also excluded from the scope of the investigation are all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness, of ASTM A-53, ASTM A-106 or API 5L specifications. Subject seamless standard, line, and pressure pipe are normally entered under HTSUS 7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055, 7304.59.8060, 7304.59.8065, 7304.59.8070. The HTSUS subheadings and specifications are provided for convenience and customs purposes; the written description of the scope is dispositive..

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 9건

1. 2026-07-06
   일몰재심 · 최종판정

   DOC, 긴급 일몰재심(expedited sunset review) 최종판정 : 상계관세 조치 유지

2. 2026-03-02
   일몰재심 · 개시

   https://www.federalregister.gov/documents/2026/03/02/2026-04123/initiation-of-five-year-sunset-reviews

3. 2021-08-23
   원심 · 부과명령

   업체명 일진제강 마진 1.78 비고 업체명 기타(All Others) 마진 1.78 비고

4. 2021-08-02
   원심 · 최종판정

   * ITC 최종판정 : 산업피해 긍정

5. 2021-07-02
   원심 · 최종판정

   업체명 일진제강 마진 1.78 비고 업체명 기타(All Others) 마진 1.78 비고 *DOC 상계관세 최종판정

6. 2020-12-11
   원심 · 예비판정

   업체명 일진제강 마진 2.13 비고 업체명 기타(All Others) 마진 2.13 비고 *DOC 상계관세 예비판정

7. 2020-08-21
   원심 · 예비판정

   * ITC 예비판정 : 산업피해 긍정

8. 2020-07-28
   조사개시

   DOC 조사개시: 2020.7.28. POI: 2019.1.1.-2019.12.31.

9. 2020-07-08
   제소

   Vallourec Star, LP 피제소국 : 한국, 러시아