무방향성 전기강판 (NOES: Non-Oriented Electrical Steel)

사건 정보

설명

The merchandise subject to these orders consists of non-oriented electrical steel (NOES), which includes cold-rolled, flat-rolled, alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term “substantially equal” means that the cross-grain direction of core loss is no more than 1.5 times the straight grain direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface oxide coating, to which an insulation coating may be applied. NOES is subject to these orders whether it is fully processed (i.e., fully annealed to develop final magnetic properties) or semi-processed (i.e., finished to final thickness and physical form but not fully annealed to develop final magnetic properties). Fully processed NOES is typically made to the requirements of ASTM specification A 677, Japanese Industrial Standards (JIS) specification C 2552, and/or International Electrotechnical Commission (IEC) specification 60404-8-4. Semiprocessed NOES is typically made to the requirements of ASTM specification A 683. However, the scope of these orders is not limited to merchandise meeting the ASTM, JIS, and IEC specifications noted immediately above. NOES is sometimes referred to as cold-rolled non-oriented (CRNO), non-grain oriented (NGO), non-oriented (NO), or cold-rolled non-grain oriented (CRNGO) lectrical steel. These terms are interchangeable. Excluded from the scope of these orders are flat-rolled products not in coils that, prior to importation into the United States, have been cut to a shape and undergone all punching, coating, or other operations necessary for classification in Chapter 85 of the Harmonized Tariff Schedule of the United States (HTSUS) as a part (i.e., lamination) for use in a device such as a motor, generator, or transformer. The subject merchandise is provided for in subheadings 7225.19.0000, 7226.19.1000, and 7226.19.9000 of the HTSUS. Subject merchandise may also be entered under subheadings 7225.50.8085, 7225.99.0090, 7226.92.5000, 7226.92.7050, 7226.92.8050, 7226.99.0180 of the HTSUS. Although HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope is dispositive.

출처: 한국무역협회 수입규제 통합조회 · 원문 보기 ↗

경과 13건

1. 2026-04-16
   일몰재심 · 최종판정

   DOC 일몰재심 조사 결과 발표 - 반덤핑 마진율 : 한국 6.88, 중국 407.52, 독일 98.84 일본 204.79, 스웨덴 126.72, 대만 52.23

2. 2020-12-23
   일몰재심 · 부과명령

   DOC, 1차 종료재심사 결과 기존 조치 지속 결정

3. 2020-11-18
   일몰재심 · 최종판정

   ITC 일몰재심 최종판정 - 한국 최대 6.88% 덤핑마진율 지속 부과 예정

4. 2020-02-21
   일몰재심 · 최종판정

   DOC 일몰재심 조사 결과 발표 - 반덤핑 마진율 : 한국 6.88, 중국 407.52, 독일 98.84 일본 204.79, 스웨덴 126.72, 대만 52.23

5. 2019-11-01
   일몰재심 · 개시

   DOC 일몰재심 조사개시

6. 2014-11-06
   원심 · 최종판정

   ITC 산업피해 최종 긍정 판정

7. 2014-10-06
   원심 · 최종판정

   업체명 포스코 마진 6.88 비고 업체명 기타(All Others),기타(All Others),기타(All Others) 마진 6.88,0.59%,0.59% 비고 ,미소마진,미소마진 DOC 반덤핑 최종판정 * 상계관세 미소마진 최종 판정(0.65%)

8. 2014-05-16
   원심 · 예비판정

   업체명 포스코 마진 6.91% 비고 업체명 기타(All Others) 마진 6.91% 비고 DOC 반덤핑 예비판정 * 덤핑마진율(%): 중국 407.52, 일본 135.59~204.79, 독일 86.29~98.84, 스웨덴 98.46~126.72, 대만 28.14~52.23

9. 2014-03-19
   원심 · 예비판정

   업체명 포스코 마진 0.59% 비고 미소마진 DOC 상계관세 예비판정 - 미소마진 판정 # 미소마진

10. 2013-12-06
    원심 · 예비판정

    ITC 산업피해 긍정 예비판정

11. 2013-11-14
    원심 · 개시

    DOC 반덤핑 조사개시 * DOC 상계관세 조사개시(13.11.14)

12. 2013-09-30
    제소

    AK Steel Corporation 피제소국 : 한국, 중국,독일, 일본, 대만, 스웨덴

13. 2013-09-30
    조사개시

    DOC 반덤핑 조사 개시: 2013.11.18. POI: 2012.7.1.-2013.6.30.